Download  Print this page

Mode Selection - ELNA eXpressive 860 Instruction Manual

Hide thumbs

Advertisement

Mode Selection

When you turn the power switch on, the visual touch
screen will show the ordinary sewing mode after a few
seconds.
The machine is set for straight stitch sewing.
NOTE:
q
After turning on the power, it takes several seconds to
display the opening window.
(This is the required boot up procedure.)
To switch to the embroidery mode, first turn the power
w
e
switch off then attach the embroidery unit.
Turn the power switch on and press the mode switch key.
q Mode switch key
A confirmation message w will appear. Do not press
the OK key or X key. Open the carriage arm and the
message e will appear. Press the OK key to switch to
the embroidery mode and the carriage will move to the
starting position.
To switch back to the ordinary sewing mode, press
the mode switch key and follow the instructions in the
confirmation message.
For embroidery sewing, please refer to embroidery
sewing instruction from page 84.
23

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: