Function Keys - ELNA eXcellence 710 Instruction Manual

e
q
q LCD screen
The LCD screen shows the following information when the
machine is turned on:
w Stitch pattern
e Mode
r Stitch pattern number
t Recommended type of presser foot
y Stitch width
u Stitch length
i MODE key (refer to page 25)
Press the MODE key to select the mode.
When the power is turned on, the direct pattern selection
(MODE 1) is set automatically.
o Auto thread cutting key (refer to page 73)
Press this key if you wish to cut the threads automatically
after finish sewing with a locking stitch.
When programming a pattern combination, press this key
to cut the threads automatically after finish sewing.
!0 Stitch width adjusting key (refer to pages 31, 40, 49)
Press this key to alter the stitch width.
!1 Stitch length adjusting key (refer to pages 31, 40, 49)
Press this key to alter the stitch length.
!2 Cursor key (refer to pages 80, 81)
Press " " or " " to move the cursor to check or edit the
pattern combination.
!3 Number keys (refer to page 24)
Enter a 2-digit pattern number to select the desired stitch
pattern in modes 1 to 6.
!4 Clear key (refer to pages 26, 81)
Press the clear key to clear the memorized stitch pattern.
Press and hold this key until the buzzer sounds to delete
the whole pattern combination.
r
t
w
y u
!2
!3
!4

Function Keys

!5 Memory key (refer to pages 71)
Press this key to register programmed pattern
combinations.
Up to 50 stitch patterns combination can be memorized.
!6 Elongation key (refer to page 68)
Press this key to elongate satin stitch patterns.
!7 Mirror image key (refer to pages 74)
Press this key to sew a mirror image of the selected
pattern.
!8 Startover key (refer to page 75)
Press this key to sew a pattern combination from the
beginning.
!9 Twin needle key (refer to page 70)
Press this key when sewing with a twin needle.
@0 Set key (refer to page 25)
Press this key to enter the setting mode for customizing
the machine settings.
@1 Lockout key (refer to page 13)
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press this key again.
@2 Direct pattern selection keys (refer to page 24)
You can select the stitch patterns 01 , 04 , 11 , and 06
in MODE 1 directly.
When the straight stitch needle plate is being attached,
you can select the stitch patterns 01S , 04S or 06S
only.
9
o !0 !1
i
@2
!9
!6
@0
!7
@1
!8
!5