Loading Tabbed Sheets In Multi-Sheet Bypass Tray - Konica Minolta bizhub PRO 920 Operation Manual

Supplies & Handling

Loading Tabbed Sheets in Multi-Sheet Bypass Tray

0 The tab extension width should be 12.5 mm or less.
Example: 3 tabbed sheets loaded in position for one finished set
Front
Example: 9 tabbed sheets loaded in position for 3 finished sets
Front
1
Open the Multi-sheet bypass tray.
2
Load tabbed sheets as illustrated above.
3
Adjust the paper guides to the paper size.
4
Specify the paper type for the Multi-sheet bypass tray.
!
Detail
See "Copying Using Special Paper (Bypass Tray Setting)" on page 9-16
for specifying the paper type of the Multi-sheet bypass tray.
bizhub PRO 920
Rear
Printed
side
Rear
1st TAB
Printed
side
1st TAB
2nd TAB
3rd TAB
ONE FINISHED SET
1st TAB
2nd TAB
2nd TAB
3rd TAB
3rd TAB
3 FINISHED SETS
4
1st TAB
2nd TAB
3rd TAB
4-13