Copying Non-Standard Size Originals (Custom Size / Tab Paper) - Konica Minolta bizhub PRO 920 Operation Manual

Original Setting

Copying Non-Standard Size Originals (Custom Size / Tab Paper)

The copier usually detects the standard size of originals fed through ADF or
positioned on the original glass (Standard Size mode).
Use Custom Size mode to specify the scanning area manually for copying or
printing special size originals. Use Tab Paper mode to copy a tabbed
original, including the image of the tab part, onto tabbed copy paper.
0 Use Full Area on the Custom Size Screen for small originals that cannot
be copied in Standard Size mode.
0 Tab extension width for tabbed originals: 12.5 mm or less
Tabbed copy paper size and tab extension width can be specified in
paper type/size setting.
1
Touch [Combine Originals] on the Basic Screen.
The Combine Originals setting menu will be displayed.
2
Touch [Original Size].
The Original Size Screen will be displayed.
3
Touch [Custom Size] or [Tab Paper].
The Custom Size Screen or Tab Paper Screen will be displayed.
bizhub PRO 920
10
10-21