Konica Minolta bizhub PRO 920 Operation Manual page 628

18
5
Specify the following items.
Enter numeric values using the control panel keypad. After entering a
value, touch [Set]. The next item becomes highlighted for setting.
Continue in this manner.
– IP Address
Enter the IP address of the machine.
– Subnet Mask
Enter the subnet mask.
– Gateway Address
Enter the gateway address.
– IP Address (Server PC)
Enter the IP address of the PC on which PageScope Job Editor
Server is installed.
– IP Adress (Tandem)
Enter the IP Address of the tandem sub machine working in
tandem.
– Line Speed Setting
Specify the line speed of the network. Choose from the options
provided.
6
Touch [OK] to return to the Network Setting Screen.
7
Touch [Close] to return to the Administrator Setting Screen.
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
18-106
Utility <Administrator Setting>
bizhub PRO 920