Paper Type Specifications - Konica Minolta bizhub PRO 920 Operation Manual

15
Right/Left shift amount for both front and back pages.
Vertical : -9% to +9% (in 0.1% increments)
Horizontal : -9% to +9% (in 0.05% increments)
Up/Down : -99mm to +99mm (in 0.1mm increments)
Right/Left : -99mm to +99mm (in 0.1mm increments)

15.1.2 Paper Type Specifications

The following four paper types are provided according to the plainness of
paper.
Smooth, Fine, Normal, Embossed
Set paper type details as referring to the specifications listed in the table on
the following page. Any paper type other than these four will be require
special settings.
Fine
The Fine paper is a non-coated paper generally used for offset printing. The
fine paper has a high degree of whiteness and used for various purposes.
Normal
The Normal paper is used for copying in general and is called "PPC paper".
The normal paper is usually not a recycled paper.
Embossed
The Embossed paper has a non-smooth surface on which a toner is hard to
be fixed. Fine paper types such as book paper and cotton paper are included
in this category.
Blank Insert
Blank Insert is not a category of the paper type. This is only fed without being
printed. When the Cover With Blank Sheet, Blank Insert, or OHP interleave
blank function is used, specify [Blank Insert] to a tray to which a paper
already printed and not copied by this machine is loaded, or a blank paper
only to be fed is loaded.
User
When a paper type other than that of which can be specified on this machine
is used, use this function. For the details, contact your service
representative.
OHP
Transparent film cannot be loaded on the main body tray and Large Capacity
Unit. Specify [OHP] to a Bypass tray.
15-4
Paper Setting
bizhub PRO 920