Post Inserter Pi-501; Trimmer Unit Tu-501; Before Making Copies - Konica Minolta bizhub PRO 920 Operation Manual

8
Finishing
- Duplex Bind
Makes double-sided copies upside down on the reverse side from
normal originals.
- Output for Machine with Finisher FS-509/FS-604 Installed:
Sort, Group, Offset and Staple modes using the Primary (main) tray
Sort and Group modes using the Secondary (sub) tray
Selects an output tray and output mode on the Finishing popup menu.
- Half Fold, Fold&Staple, Trimming (FS-604 with Trimmer Unit TU-501)
Folds output copies in the centre to make a booklet. Use Fold&Staple to
staple in the centre, and/or use Trimming to trim the end of booklets.
- Punch (Punch Kit PK-504/505, Z Folding Unit ZU-601/602)
Makes file holes in output copies.
- Z-Fold, Letter Fold In, Letter Fold Out (Finisher FS-604, Z Folding Unit
ZU-601/602)
Makes zigzag-folded copies (Z-Fold), or folds copied set in three (Letter
Fold In, Letter Fold Out).
- Cover Sheet Feeding (Finisher FS-509/FS-604 with Post Inserter PI-501)
Attaches thick covers or insertions to output copies.
- Manual Finishing (Finisher FS-509/FS-604 with Post Inserter PI-501)
Manually staples/punches/folds paper sets without printing.
- Tandem Mode
Works in tandem to distribute a large copying job in half the time of non-
tandem mode.
Job List
- Job List
Displays the Job List Screen to view the output/send history, check the
incomplete/suspended jobs, or to manage current and reserve jobs.
Advanced Information
- Proof Copy
To ensure correct output before running multiple copies, run a proof copy
by pressing [Proof Copy] on the control panel or touching [Proof Copy]
on the Check Screen.
- Check Mode
To check the job settings before running multiple copies, press [Mode
Check] on the control panel to display the Check Screen.
- Interrupt Copying
Interrupts copying-in-progress to perform an urgent copy, using any of
the copier features for the interrupt job.
- Mode Memory
Programs up to 30 jobs and recalls each job by job number, as needed.
- Pre-Job Recall
Recalls the settings of the previous output job.
8-6

Before Making Copies

bizhub PRO 920