Simplex/Duplex; Making Double-Sided Copies Using Adf - Konica Minolta bizhub PRO 920 Operation Manual

9
9.5

Simplex/Duplex

The Basic Screen is initially set to 1-1 copy mode to make single-sided
copies from single-sided originals.
Follow the procedure below to make double-sided copies from the originals
scanned from the document feeder or from the original glass, and also to
make single-sided copies from double-sided originals.
!
Detail
The machine is set to match the original binding direction and copy
binding direction automatically. For details, refer to "2 Each Function
Setting" on page 17-63.
If copy result is not as expected, this setting might be altered by the
administrator. In this case, specify the copy binding direction manually.
See "Setting Binding Direction for Duplex Copies" on page 12-7 for
details.

Making Double-Sided Copies Using ADF

Select the copy mode according to the original type (single-sided or double-
sided).
0 Position originals according to the original direction icon on the Basic
Screen.
0 The normal double-sided copies (having the same edge as page top) can
be made from double-sided originals printed upside down on the back
pages.
2-2 Copying
1-2 Copying
9-30
Basic Job Settings
bizhub PRO 920