Loading Tabbed Sheets In Multi-Sheet Bypass Tray - Konica Minolta bizhub pro 920 Copier Manual

Supplies & Handling

Loading Tabbed Sheets in Multi-Sheet Bypass Tray

0 The tab extension width should be 12.5 mm or less.
Front
Front
1
Open the Multi-sheet bypass tray.
2
Load tabbed sheets as illustrated above.
3
Adjust the paper guides to the paper size.
4
Specify the paper type for the Multi-sheet bypass tray.
!
Detail
See page 9-15 for specifying the paper type of the Multi-sheet bypass
tray.
bizhub PRO 920
Example: 3 tabbed sheets loaded in position for one finished set
Rear
Printed
side
Example: 9 tabbed sheets loaded in position for 3 finished sets
1st TAB
Rear
Printed
side
1st TAB
2nd TAB
3rd TAB
ONE FINISHED SET
1st TAB
2nd TAB
2nd TAB
3rd TAB
3rd TAB
3 FINISHED SETS
4
1st TAB
2nd TAB
3rd TAB
4-11