When Weekly Timer Is Activated - Konica Minolta bizhub PRO 920 Operation Manual

2

When Weekly Timer Is Activated

The Weekly Timer function turns a copier on and off at the time specified by
the administrator.
When a machine is in OFF condition under control of Weekly Timer, the
[Power Save] LED is lit and machine operation is unavailable.
However, the following procedure temporarily enables the machine
operation. (Timer Interrupt)
Prerequisites:
0 The Timer Interrupt password is to be specified in the administrator
setting. Ask your administrator for the password.
0 The machine power will be turned off automatically if 5 minutes have
passed without entering a password.
0 Entering a number smaller than 5 will set the minute at 5. A number larger
than 60 is also unavailable.
1
Press [Power Save] on the control panel.
The Basic Screen will be displayed along with the following message:
Timer interrupt mode
Please input password
Does the message read "Input copy time / 0 hour(s) 05 minute(s)"?
?
% Password is not required to be entered. Proceed to step 3.
2
Enter the Timer Interrupt password, then press [Start].
– Enter a 4-digit Timer Interrupt password using the control panel
keypad.
Timer interrupt mode
Please input password ####
Press [Start].
Is the entered password invalid?
?
% Continue by entering the valid 4-digit password.
2-28
Preparation for Use
bizhub PRO 920