Job Operation On Job List Screen; To Check/Control Reserved Jobs; Job Operation For Reserved Jobs - Konica Minolta bizhub PRO 920 Operation Manual

13
13.2

Job Operation on Job List Screen

This section describes how to check/operate the jobs on the Job List Screen.

To Check/Control Reserved Jobs

Use this function to display all the reserve jobs as a list.
The list includes following information.
- No.: Consecutive numbers of both copy and print jobs
- Mode: Copy or Printer
- Status: Printing or Reserved (current status of the job)
- No. of Org.: Max. 4-digit page count
- Pages To Go: Max. 5-digit pages to be output (sheets × sets = pages to
go)
- Minute(s): Time required for completing each job (minute)
Follow the procedure below to check the settings, change the output order,
and suspend/delete/stop reserved jobs.

Job operation for reserved jobs

1
Touch [Reserve] on the Job List Screen.
– Check the status of the reserved jobs.
– Touch the lower arrow key to scroll, if 6 or more jobs are entered.
13-4
Job Management
bizhub PRO 920