Erasing Outside Of Original (Non-Image Area Erase); To Set Non-Image Area Erase Function - Konica Minolta bizhub PRO 920 Operation Manual

Applications

11.16 Erasing Outside of Original (Non-Image Area Erase)

The Non-Image Area Erase mode is used to copy non standard or special
originals, such as books, magazines, paste-ups, graphs, thick or thin
materials, etc. from the original glass. The exposed glass area outside the
borders of the original will not be copied.
Note
This function may not operate properly if the lighting in the work place is
directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.

To set Non-Image Area Erase function

0 Use the original glass only. Keep ADF open throughout the procedure.
0 Original size should be larger than 10 mm × 10 mm.
0 Auto Zoom and Auto Paper Select are automatically released.
0 Copy mode is automatically set to 1-1. When selecting 1-2 mode,
Separate Scan mode will function automatically.
bizhub PRO 920
General copying
Non-Image Area Erase
11
11-59