Konica Minolta bizhub PRO 920 Operation Manual page 592

18
– When [Annotation No.] is selected:
The Annotation No. Setting Screen will be displayed.
To specify the Type In words, touch [Set] on the right side of Type
In indication to display the Input Type In Screen, enter the desired
words, then touch [OK]. To clear the specified words and leave the
line blank, touch [Clear] next to [Set].
To specify the Annotation Number, touch [Set] on the right side of
Annotation Number indication to display the Input Annotation
Number Screen, enter the start number, then touch [OK].
Touch [All Digit] or [Effective Digit] to select the print form of the
serial number.
Touch [OK] on the Annotation Number Setting Screen to complete
the setting.
– When [No Print] is selected:
The key will be highlighted, and the Item 1 will not be printed.
18-70
Utility <Administrator Setting>
bizhub PRO 920