User Authentication in Enhanced Security Mode
24.2
To register a new user
Follow the procedure below to setup a new user name and password to be
required for user authentication in Enhanced Security mode.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are
entered and the [OK] is touched, the warning message "Password does
not match" will appear, and no key will work for five seconds. Enter the
right password after five seconds.
If authentication fails, the information will be saved in the audit log.
1
Press [Utility/Counter] on the control
panel.
The Utility Screen will be displayed.
2
Touch [6 Administrator Setting].
The Input Administrator Password Screen will be displayed.
bizhub PRO 920
24
24-5