Konica Minolta bizhub PRO 920 Operation Manual page 578

18
7
If [Next] and [Back] is displayed, Touch them to select a desired output
order (face up or face down).
8
Select + and – by touching the [+--] key on the touch screen keypad,
and touch [Set].
9
Touch [Close] to return to the Centring Adjustment Screen.
10
Touch [Close] to return to the Expert Adjustment Screen.
11
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
18-56
Utility <Administrator Setting>
bizhub PRO 920