To Load Tabbed Sheets In Bypass Tray - Konica Minolta bizhub pro C6501 User Manual

Supplies & Handling
Reminder
Do not load above the limit level on the side guide plate.
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise the machine cannot detect the correct
paper size, or machine trouble may occur.

To load tabbed sheets in bypass tray

Rear
Front
Rear
Front
1
Open the bypass tray located on the right side of the machine.
2
Specify the paper type as tabbed sheets for the bypass tray.
– See page 9-44 for specifying the paper type of the bypass tray.
3
Place tabbed sheets on the tray.
– Place paper referring to the illustration shown above.
bizhub PRO C6501
Example: 3 Tabbed sheets loaded in position for one finished set.
Printed
side
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
Printed
side
1st TAB
2nd TAB
3rd TAB
ONE FINISHED SET
1st TAB
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS
4
1st TAB
2nd TAB
3rd TAB
2nd TAB
3rd TAB
4-23