Konica Minolta bizhub PRO 920 Operation Manual page 292

11
– Touch [Frame Erase/All Sides], [Frame Erase/Each Side], or [Centre
Erase] to highlight it. Either of Frame Erase mode and Centre Erase
mode can be selected in combination.
5
Specify the erasure amount in the selected mode.
– To specify "Frame Erase/All Sides" amount, use the touch panel
keypad or up/down arrow key to enter the desired erasure amount
of the Top, Right, Left, and Bottom sides collectively, from 1 to 300
mm in 1 mm increments.
– To specify "Frame Erase/Each Side" amount, touch [Top], [Right],
[Left], or [Bottom] to highlight the key and current amount indicated
in the illustration area.
Use the touch panel keypad or up/down arrow key to enter the
desired erasure amount, from 1 to 300 mm in 1 mm increments.
– To specify "Centre Erase" amount, use the touch panel keypad or
up/down arrow key to enter the desired erasure mount, from 1 to
99 mm in 1 mm increments.
6
Touch [OK] repeatedly till the Application Screen is restored.
Do you want to cancel changes to the settings?
?
% Touch [Cancel].
Do you want to cancel the Frame/Centre Erase function?
?
% Touch [Off].
7
Enter the desired print quantity, position original(s), then press [Start].
11-58
Applications
bizhub PRO 920