Konica Minolta bizhub PRO 920 Operation Manual page 804

20
Reset
This screen appears when you click [Reset] under the [Maintenance] menu.
Restart on the network section to enable new parameters. In this case, the
controller will be initialized, however the main body will not.
!
Detail
If you want to initialize the main body after resetting the network, wait
until the controller restarts (about 2 minutes) and turn the main power
switch OFF. Wait 10 seconds or longer before turning the device ON
again.
It may take few minutes for resetting the network. After resetting the
network, you can access the network again. When you use the network,
restart the Web browser.
Description
- Reset:
Click the [Reset] button to restart the network only to enable new
parameters.
20-16
PageScope Web Connection Setting
bizhub PRO 920