Tandem Setting>5 Distribution Recovery - Konica Minolta bizhub PRO 920 Operation Manual

Utility <User Setting>
5 Tandem Setting>5 Distribution Recovery
Set the tandem-connected machines to perform the job distribution again for
print quantity remaining on one machine when the other has already finished
with its assignment.
!
Detail
By default, the Tandem Setting key is not displayed. Contact your service
representative.
Note
This function cannot be turned On if the setting 2 Tandem Sub Machine
Wait/Proof is set to [Permit].
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [2 Function Setting].
The Function Setting Screen will be displayed.
3
Touch [5 Tandem Setting].
The Tandem Setting Screen will be displayed.
bizhub PRO 920
17
17-55