System Setting; Power Save Setting - Konica Minolta bizhub PRO 920 Operation Manual

Utility <Administrator Setting>
18.3

1 System Setting

1 Power Save Setting

Specify Low Power Mode or Sleep Mode when setting the Power Save mode
manually, and select the interval of time that must elapse before Low Power
Mode and Sleep Mode.
Note
The period of time selected for Low Power Mode cannot exceed the
Sleep Mode setting.
If the same period of time as Sleep Mode is selected for Low Power
Mode, Sleep Mode will function instead of Low Power Mode.
If the period of time selected for Sleep Mode is shorter than that of for
Low Power Mode, the period of time for Low Power Mode will be forcibly
reset to the same period of time as Sleep Mode. Low Power Mode will
not function.
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [6 Administrator Setting], enter the administrator password, and
then touch [OK].
The Administrator Setting Screen will be displayed.
3
Touch [1 System Setting].
The System Setting Screen will be displayed.
bizhub PRO 920
18
18-13