Konica Minolta bizhub PRO 920 Operation Manual page 116

5
2
Follow the procedure on the screen to remove misfed paper.
– Touch the arrow key to go to the next page of a series of
illustrations, if provided.
– Touch [JAM Position] to return to the Jam Position Screen.
3
When completed, the Machine Status Screen will be restored.
– If any misfeed location is left, the Jam Position Screen will be
restored with the next disposal procedure in the message area and
the location number in the jam position display. Repeat steps 1 to
2 until all the locations are cleared.
Reminder
When removing mishandled paper, be sure to leave no torn paper inside
the machine.
Do not touch or damage the drum surface.
7 CAUTION
The internal fixing unit is very hot.
% To avoid getting burned, DO NOT TOUCH.
Be especially careful not to put your hand into the fixing unit area when
withdrawing the fixing conveyance unit to remove mishandled paper.
7 CAUTION
When removing stuck staples
% Be careful of removing staples stuck inside the machine so as not to
get injured.
5-6
Troubleshooting
bizhub PRO 920