Konica Minolta bizhub PRO 920 Operation Manual page 327

Applications
Do you want to recall image previously stored?
?
% Proceed to step 9.
4
Touch [Store] to display the Image Name Entry Screen.
5
Enter the desired image name.
– Use the touch panel keypad to enter the desired name up to 8
characters. The date when you made this entry will be stored
automatically.
– To correct an entry, touch [Delete] repeatedly to delete each
character, then enter the correct name.
6
If the image name is correct, touch [OK].
The Basic Screen to store the overlaying image will be displayed.
Select the desired copy conditions.
What if the entered image name has been already used?
?
% See Note at the bottom of this section.
7
Position the overlaying original on the original glass.
bizhub PRO 920
11
11-93