Connecting The Pc Adapter To 68Xx And Serial Device - Symbol Series 6800 Product Reference Manual

Connecting the PC Adapter to 68XX and Serial Device

To set up the PC Adapter (refer to Figure 2-16):
1. Turn the PC and terminal OFF.
2. Plug the PIM's DB-9 connector in the PC Adapter's DB-9 port.
3. Attach the PIM's optical connector to the 68XX's port by inserting the clips on the
connector in the slots on either side of the port (see
Figure 2-17. Attaching the PIM's Optical Connector
PIM's Optical
Connector
PIM
RS-232 Cable
Figure 2-16. Setting Up the PC Adapter
68XX's
Optical
Port
DB-25 PC
Connector
Adapter
PIM
Optical Connector
Clips
PIM Cable
Slots
Hardware Setup
Power Supply
Power DB-9 Port
Supply
Port
Figure 2-17).
2-17