DIAG24
DIAG24 is intended for use in two situations:
t
As a connectivity tool, using a ping that is not re-tried on transmission errors. This
test is intrusive as pings are sent as fast as possible.
t
As a diagnostic tool for potential radio problems. It can eliminate or confirm that the
traffic problems are in the radio portion of the network. The round-trip time
reported during the test indicates the portion of the transaction response time that is
attributable to the radio network.
This program uses the text message file MSG.MSG which is read from the same drive and
directory as the executable (DIAG24.EXE). Corrupted screens are an indication that the
message file was not found.
Syntax
DIAG24
Description
To run DIAG24 on a 6840:
1. At a DOS prompt on the terminal, type:
DIAG24
and press <ENTER>.
The menu shown in
Spectrum24 Network and Flash Disk Utilities
Figure E-12
is presented.
DIAG24 ver 1.xx
1. AP Ping Test
2. Field Diagnostics
Select[1-2 or 'Q']:
Figure E-12. DIAG24 Screen
E-13