Hardware Requirements - Symbol Series 6800 Product Reference Manual

Batch and Spectrum One Terminal Setup
Introduction
Before using a Series 6800 terminal, perform the following procedures:
t Install the battery (refer to
t Charge the battery (refer to
t Load the system files and application(s).
Programs are stored in the terminal's nonvolatile memory (NVM), also called the application
EEPROM.

Hardware Requirements

The following equipment is required to initialize a batch or a Spectrum One radio terminal:
6800 or 6810 terminal
t
t One or more 38/6860 or 38/6865 cradles, or 38/6866 CCM
OR
t PC adapter with Printer Interface Module (PIM)
t A straight-through RS-232 null modem cable with male DB-25 connector at one end
and female DB-25 connector at the other end
Power Supply
t
t Host Computer
Chapter 3
Chapter 6, Maintaining the Series
Chapter 6, Maintaining the Series
68XX)
68XX)
3-1