Symbol Series 6800 Product Reference Manual page 57

Series 6800 Product Reference Guide
7. When the hex download is complete, the 6840 automatically reinitializes (warm
boots) and copies the files in the software package to the flash disk. If the 6840 does
not reinitialize, re-initialize the 6840 using the following key sequence:
Note: The 6840 must be re-initialized to copy the software to the flash disk.
For the 46-key 6840:
s Press and hold the 4 and 5 keys.
s Press and release PWR.
s Release the 4 and 5 keys.
Note: If you get a timeout message at any time during the procedure, press
<ENTER> to return to the screen.
8. The software is copied on to the flash disk.
9. Proceed with initializing the network connection as described in the section
Network Connection.
Note: If you downloaded multiple applications, a "select" screen appears
before the 6840 attempts to associate with an AP, requesting that you
select an application.
4-14
Address: XXXX
Initiating