Symbol Series 6800 Product Reference Manual page 34

To chain the CCMs:
1. Couple the CCMs as directed in the section Coupling CCMs.
2. In the first coupled section, connect the serial cable to the left-most CCM.
3. Connect the RS-232 cable's (male or female) DB-25 connector in the serial port of
the right-most CCM in the first coupling.
4. Connect the (male or female) DB-25 in the serial port of the left-most CCM in the
second coupling.
5. Connect the power supplies for each coupled section as directed in Connecting
Power to the 38/6860 CCM.
Hardware Setup
2-15