Symbol Series 6800 Product Reference Manual page 61

Hand-held, battery-powered, portable data collection device

Table of Contents

Series 6800 Product Reference Guide

5. When the transmission is complete, the 6840 displays:

A status of 0000 (all zeroes) indicates a successful transfer. If the status is other than

0000, check the cable connections between the host PC and the cradle and repeat the

process. If the problem persists, contact the Symbol Support Center for assistance.

6. When the download is complete, the 6840 displays the following query:

Reformatting the ﬂash removes all system ﬁles and applications stored on

the ﬂash disk.

Select 1, Reformat ﬂash, ONLY if you have problems with the 6840's oper-

ation. Select 2, Use ﬂash as-is, to update the ﬂash while retaining the existing

contents.

7. If you select 1, the 6840 displays the message:

8. Press Y to continue with the reformat or N to cancel and press <ENTER>.

The 6840 ﬁnishes reformatting (if requested), copies the ﬁles to the ﬂash disk, and

executes them.

4-18

Program loader

Status 0000

LWP.HEX Ver X.XX

Loading system files

1. Reformat flash

2. Use flash as-is

Select [1,2]:

Caution

Are You sure Y or N

Table of Contents

Troubleshooting