Symbol Series 6800 Product Reference Manual page 59

Series 6800 Product Reference Guide
where:
SENDHEX
LWP
384
[1|2]
The following message is displayed:
Press <ENTER> when remote is ready. ESC to abort...
3. Do NOT press <ENTER> yet. Set up the terminal as described in
Communications.
Initiate Terminal Communications
1. Power off the 6840 and place it in the cradle.
2. Boot the 6840 to Command Mode.
For the 46-key 6840:
s Press and hold <F + I >.
s Press and release PWR.
s Release <F + I >.
The terminal displays the function selector screen:
3. Scroll through the Command Mode options using
is displayed. Press <ENTER>.
4-16
is the command.
is the hex file being loaded. LWP.HEX is the hex file specifically for
the system files. There may be other hex files which load other
software, such as applications, to the flash disk.
is the baud rate (38,400 bps).
sets the host's communication port the cradle is connected to.
COMMAND MODE
Select function
Self Test
Initiate Terminal
á â
or until "Program loader"