Symbol Series 6800 Product Reference Manual page 117

Series 68XX Product Reference Guide
To change the current Terminal IP Address, backspace over the current value and
type a new value in decimal form. Each part of the four-part address must be in the
range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
6. Select Diversity from the main configuration menu. The Diversity screen
(Figure E-7) is displayed.
If Diversity is set to "Yes", the radio firmware attempts to use both antenna ports for
communications. For the Series 684X, set Diversity to "No".
To change the current Diversity setting, use the
the settings "Yes" and "No".
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
7. Select Terminal Sleep Mode from the main configuration menu. The Terminal Sleep
Mode screen (Figure
If this switch is set "On", the radio is not powered off when an application powers
down the terminal because of inactivity. The terminal can be awakened by a message
directed to it, but not by a broadcast message. If the switch is set to "Off", the radio
E-6
DIVERSITY
2 antennas (Yes/No)
Yes
áâ, Clear, Enter
Figure E-7. Diversity Screen
E-8) is displayed.
TERMINAL SLEEP MODE
Radio state:
On
áâ, Clear, Enter
Figure E-8. Terminal Sleep Mode Screen
áâ
cursor keys to toggle between