Symbol Series 6800 Product Reference Manual page 26

Connecting Power for the 38/6865 and 38/6866
Note:The process for connecting power is the same for both cradles.
1. Connect the power supply cord's round plug to the power connector on the left side
of the cradle.
2. Connect the power supply's AC plug to a standard electrical outlet.
The green and red indicators light for 3 seconds, blink for 3 seconds, then go out.
Figure 2-7. Connecting the 38/6865 and 38/6866 to a Power Source
38/6865
Hardware Setup
38/6866
2-7