Symbol Series 6800 Product Reference Manual page 42

5. Baud Rate.The terminal displays:
Scroll through the list using UpArrow or DownArrow. When the correct rate is
displayed (38400 is recommended), press <ENTER>.
6. Data Bits. The terminal displays:
Press <7> (recommended) or <8> to specify data bits, or scroll through the list using
UpArrow and DownArrow. Press <ENTER> when the correct value is displayed.
Note: If 8 data bits is selected, the program selects "No parity" and skips
the next step.
7. Parity. If 7 data bits is selected, the terminal displays:
Press the first letter of a parity option (Even, Odd, None, Space, or Mark), or scroll
using UpArrow and DownArrow and press <ENTER> when the correct value is
displayed.
8. Flow Control. The terminal displays:
Press the first letter of a flow control option (None, Xon/Xoff, or RTS/CTS), or scroll
using UpArrow or DownArrow and press <ENTER> when the correct value is
displayed.
Batch and Spectrum One Terminal Setup
Comm Parameters
Baud
4 9600
Comm Parameters
Data Bits
7
Comm Parameters
Parity
Odd
Comm Parameters
Flow Control
None
3-5