Symbol Series 6800 Product Reference Manual page 50

c. Select Subnet Mask from the main configuration menu. The Subnet Mask screen
(Figure 4-4) is displayed.
To change the current Subnet Mask setting, backspace over the current value and
type a new value, in decimal form. Each part of the four-part address must be in
the range 0 to 255. The default value is 255.0.0.0.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
d. Select Default Router from the main configuration menu. The Default Router
screen (Figure 4-5) is displayed.
To change the current Default Router setting, backspace over the current value
and type a new value, in decimal form. Each part of the four-part address must
be in the range 0 to 255. The default value is 0.0.0.0.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
SUBNET MASK
Enter Subnet Mask:
255.255.255.0
Bksp, Clear, Enter
Figure 4-4. Subnet Mask Screen
DEFAULT ROUTER
Enter Default Router
157.235.93.178
BkSp, Clear, Enter
Figure 4-5. Default Router Screen
Spectrum24 RF Terminal Setup
4-7