Series 6800 Product Reference Guide
Refer to Chapter 2, Hardware Setup, for instructions on setting up the cradles or PC Adapter
for communications.
Communications
For terminals being used in a direct communications (batch) environment or a Spectrum One
network environment, applications are transferred from a host computer to the terminal:
t
over a communications line using a null modem connected to the cradle
OR
t
through the PC Adapter.
The procedure uses the SENDHEX command on the host computer and the Program Loader
function (from Command Mode) on the terminal.
Note: For details on the SENDHEX command, refer to the Series 3000
Application Programmer's Manual.
Other software may be used in place of SENDHEX.
3-2