Symbol Series 6800 Product Reference Manual page 53

Series 6800 Product Reference Guide
i. Select Power Management from the main configuration menu. The Power
Management screen
To change the current power management mode, use the
between the settings "PSP" and "CAM". The default setting is "PSP".
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
5. When all of your changes are made, press <CLEAR> to return to the main
configuration menu.
6. Select Exit from the main configuration menu and press <ENTER> to exit the
configurator.
The 6840 displays the message:
and proceeds with the initialization which writes the configuration values to a
R/W non-volatile section of radio flash memory.
4-10
(Figure 4-10) is displayed.
POWER MANAGEMENT
Radio Power Mode
PSP
áâ, Clear, Enter
Figure 4-10. Power Management Screen
...updating config data
áâ
keys to toggle