Controller Shield Assembly - Xerox WorkCentre PE120 Service Manual

5.9 Controller Shield Assembly

(PL 8.1.7)
1. First remove:
a. Rear cover, see page 5-2.
b.
Right side cover, see page 5-3.\
2. Remove all the connectors and 5 screws. Remove
the shield.
Controller Shield Ass'y
3. Remove the network card if equiped (2 screws).
4. Remove 3 screws to remove the bracket from the
main board.
Main Board
Service Manual
Bracket
Disassembly
5-11