Disassembly
5.12 Fuser Assembly
(PL 8.8)
1.
First remove:
a.
Rear cover, see page 5-2.
2.
Unplug 2 connectors, one to the main board and
one to the SMPS.
3.
Remove 4 screws securing the fuser assembly.
Thermostat
1.
Remove 2 bolts securing the thermostat, take care
not to lose the nuts. Remove the thermostat.
Nuts
5-14
Fuser Ass'y
Bolts
Thermostat
WorkCentre PE 120/120i
Heat Roller and Halogen Lamp
1.
Remove 2 screws securing the halogen lamp then
separate the lamp from the heat roller.
Halogen Lamp
Guide and Fuser Cover
1.
Remove 4 screws to remove the fuser cover.
2.
Remove 2 screws from the input guide.
Heat Roller
Claw
Fuser Cover
guide Input