Xerox WorkCentre PE120 Service Manual page 83

ERROR RATE
When the error rate is about to exceed the set value, the Baud rate automatically adjusts to 2400 bps, this
ensures that the error rate remains below the set value. You can select a rate between 5% and 10%.
CLEAR ALL MEMORY
All the values are returned to default, and all the information which was set by the user will be erased.
1. Clear All Memory
Select
2. Push the ENTER button.
3.
Select your country group. (There are four country groups. Refer to the table below.)
4. Push the ENTER button again, the system will now clear all memory.
Caution
If the main board is replaced, a memory clear needs to be performed for the system to operate properly.
Country Group
Country
in TECH MODE.
USA/Canada
USA/Canada UK
Mexico Germany
Brazil France
Italy
Spain
Austria
Netherlands
Belgium
Portugal
Sweden
Norway
Denmark
Finland
Switzerland
Greece
Ireland
Turkey
Service Manual
Alignment and Adjustments
UK Russia
Russia
India
Oman
Poland
Bangladesh
Kuwait
Moroco
Algeria
Pakistan
UAE
Bahrain
Srilanka
Saudi Arabia
Chile
Peru
Argentina
Hungary
Romania
Bulgaria
Czech
South Africa
South Africa
6-9