13.
Remove the reduction gear and idle gear.
Gear-Timing
Caution
When reassembling the scanner module: Place the
belt tension spring as close to the right side of the
scanner as possible.
When refitting the scan upper cover take care to
ensure that the cover open switch is not trapped.
14.
Remove 3 screws from the motor bracket and
remove the motor.
Gear-Reduction
Motor Bracket
Service Manual
15.
Unplug the connector from the open sensor
assembly.
16.
Unlatch the open sensor and remove.
17.
Remove the CCD lock.
Unlock
Lock
Disassembly
Open Sensor
CCD Lock
5-7