Xerox WorkCentre PE120 Service Manual page 92

Alignment and Adjustments
[Incompatible]
The remote machine did not have the requested feature, such as a sending a color fax. This message also occurs
if the remote machine does not have enough memory space to complete the operation you are attempting.
Solution: Reconfirm the remote machine's features.
[Jam 1] or [No Cartridge]
Paper has jammed in the paper exit area. Or, the toner cartridge is not installed.
Solution: Clear the jam. Or, install the toner cartridge.
[Line Busy]
The receiving party did not answer or the line is already engaged.
Solution: Try again after a few minutes.
Load Document
The user attempted to set up a copy or fax operation with no document loaded into the ADF.
Solution: Load a document into the ADF and try again.
Scanner Locked
The scanner module is locked
Solution: Unlock the scanner and press Stop/Clear.
[Stop Pressed]
The Stop/Clear button has been pressed during a copy or fax operation.
Solution: Try again.
[Toner Empty] Replace Toner
The toner cartridge has run out. The machine stops printing.
Solution: Replace the toner cartridge with a new one.
[Retry Redial?]
The system is waiting for a specified time interval to redial a previously busy station.
Solution: You can press Enter to immediately redial, or Stop/Clear to cancel the redial operation.
6-18 WorkCentre PE 120/120i