5.11 SMPS and LIU
(PL 8.1.6 and PL 8. 1.13)
1.
First remove:
a.
Rear cover, see page 5-2.
b.
Left and right side covers, see page 5-3.
c.
Engine shield assembly, see page 5-12.
2.
Remove 2 screws securing the inlet bracket.
3.
Remove 1 screw from the engine shield ground
wire.
4.
Remove 3 screws securing the SMPS and lift out
the SMPS.
Inlet Bracket
5.
Remove 3 screws securing the LIU and lift out the
LIU>
Service Manual
Disassembly
SMPS
5-13