Background Contamination; Ghosting 1 - Xerox WorkCentre PE120 Service Manual

Hide thumbs Also See for WorkCentre PE120:
Table of Contents

Advertisement

7.3.8 Background Contamination

Example
Light or dark background contamination appears all over the paper.
1.
Using unsupported media.
2.
Printing large quantities of low
Digital Printer
coverage (2%) pages or not using
Digital Printer
the printer for a long period of time.
3.
The toner cartridge life has expired.
Digital Printer
4.
The transfer rollers up/down
Digital Printer
movement is off.
Digital Printer
5.
There is a problem with the HVPS.

7.3.9 Ghosting 1

Example
There is ghosting at 75.5 mm intervals from the OPC drum while printing on card stock, transparencies or using the
MPT.
1.
When printing on card stock, thick
paper or transparenices a higher
Digital Printer
transfer voltage is required.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Possible Cause
Possible Cause
Service Manual
Sequence of Repair Actions
a.
Use only approved media.
b.
The toner cartridge is designed to print
5,000 sheets at 5% coverage. If 2% is
consistently used, background
contamination can occur.
c.
Replace the toner cartridge.
d.
Clean the transfer roller bushings.
e.
Clean the high voltage terminals.
f.
Replace the HVPS.
Sequence of Repair Actions
a.
Ensure supported media is being used and
the correcy type is selected in the printer
driver and software application.
Troubleshooting
7-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre pe120i

Table of Contents