Middle Cover And Exit Roller - Xerox WorkCentre PE120 Service Manual

Disassembly

5.8 Middle Cover and Exit Roller

(PL 8.6) and (PL 8.7.63)
1. First remove:
a. Rear cover, see page 5-2.
b.
Left and right side covers, see page 5-3.
c.
Scanner assembly, see page 5-4.
2.
Remove 4 screws securing the middle cover.
3.
Remove 2 screws securing the controller shield to
the middle cover, see 5.9 step 2. Unclip the middle
cover from the frame, be sure and release the shield
assembly locator pegs, then lift the cover off.
Middle Cover
5-10 WorkCentre PE 120/120i
4. Remove the exit gear and bearing to remove the
exit roller.