Table of Contents
Advertisement
Beginner Level Robot Series
３-４. Exchanging Fuse
Inside the CM-5, there is a fuse that protects circuits from over-current. If CM-5 does not
recharge or it does not power on with the battery only but the SMPS is powered on, it indicates
the shorted fuse and thus should be replaced.
※ Fuse inside CM-5 can be easily purchased in local electric stores. (220V/5A)
Separate the CM-5 and battery.
Replace with new fuse.
(Directi
on of fuse does not ma
Put back the CM-5 to original condition.
※ Refer to video clips of "Help Files \Exchanging Fuse. wmv" on the CD.
tter)
94
Separate the CM-5's case.
Take out the fuse from the circuit board.
Advertisement
Table of Contents
