Toner Empty Report; Protocol Report; Gdi Timeout - Konica Minolta magicolor 1680MF Service Manual

Field Service Ver. 1.0 Nov. 2008
14.3.10

TONER EMPTY REPORT

Function
• Select to generate a report to a specific destination when toner empty status occurs in
the engine.
Use
• The default setting is OFF.
ON:
"OFF": Not to generate report.
• If "ON" is selected, select generate report and send to remote side when toner runs out.
Setting/
• Enter the telephone number for which the report is to be produced.
procedure
• Fax number specifications: An up-to-20-digit number that may consist of [0-9], [*], [#],
[pause], and [space]. (0-9, #, *, pause, _)
• The report will generate after 20 minutes, 24 hours, 48 hours, or 72 hours after the event
has occurred or until the condition is gone.
A. Toner empty report (example)
NAME:ABC 123
TEL:1234567
DATE: Jun 10.2008 15:12
The Fax's following conditions were appears, the machine may be can not work correctly, the Fax
already send a report to your dealer automatically. They will contact with you soon.
Toner Cartridge Cyan
Toner Cartridge Magenta : Full
Toner Cartridge Yellow
Toner Cartridge Black
14.3.11

PROTOCOL REPORT

Function
• Print communication report.
• Choose one from among the following.
Use
• The default setting is OFF.
Setting/
"OFF":
procedure
ON:
ON (ERROR): Print T.30 communication report when an error occurs.
14.3.12

GDI TIMEOUT

Function
• To specify the time for GDI time out.
Use
• The default setting is 60 sec.
Setting/
procedure
Generate a report to report destination.
SERVICE REPORT
: Empty
: Full
: Full
Disable T.30 communication report.
Print T.30 communication report.
5 sec / 10 sec / 20 sec / 30 sec / 40 sec / 50 sec / "60 sec"
http://www.manuals4you.com
14. SERVICE MODE
A0FDF3C500DA
127