Table of Contents
Advertisement
Cleaning & Packaging
Cleaning the unit
Regular dusting with a dry soft, non-abrasive cloth will generally keep the finish of the front panel and
chassis cover looking like new. Avoid the use of domestic cleaning products.
Dust or finger marks can be removed from the front panel using a soft, slightly damp cloth. Disconnect the
power cord before cleaning the unit. Ensure that no water is allowed to enter the case and do not reconnect
the power cord until you are certain that the unit is completely dry.
At no time should you allow any liquid to enter the unit; it may run into the electronic circuitry and cause
damage that will not be covered under the product warranty.
Note: Do not use abrasive cleaners on any part of the unit.
To clean the audio connectors
The audio sockets on the back of the unit are gold-plated and need no cleaning if gold-plated Phono plugs
are used. Otherwise, it is recommended that the end-user unplugs and reconnects the plugs at least once a
year.
Packaging Materials
We recommend that you retain all of the packing material and shipping boxes for the unit. They are custom
designed to reduce the likelihood of damage during shipping. We will accept no responsibility for any
damage occurring to the unit, or accessory, that is shipped in packing material other than the original
packing material.
6
Advertisement
Table of Contents
