Table of Contents
Advertisement
supply unit.
3.
Ensure that the fan cable is correctly secured in the fans cable retaining slot.
4.
On one side of the fan you will see two blue and red cables entering the central spinal, this is
the side that must face the outside of the unit.
5.
Line up the fan holes with those on the fan chassis cut-out, ensuring the blue and red cables
run from underneath the fan.
6.
Secure the fan to the chassis with 4x M3 18ml screws and shake proof washers.
7.
Plug in the fan cable into the motherboard into the slot marked as 'FAN'. (See page
*DA_MOTHERBOARD_LAYOUT* for motherboard layout)
24
Advertisement
Table of Contents
