Confirming That Tcp Acceleration Is Operational - Hughes HX90 Installation Manual

Confirming that TCP Acceleration is operational

Chapter 8 • Troubleshooting
94
1039456-0001 Revision A
If any other TxCode appears, the router is not transmitting signals properly. Click
the TxCode for explanation of the problem and/or troubleshooting information.
Figure 71: Transmission Info page
Note: The TxCode shown is an example.
TCP Acceleration is a proprietary Hughes protocol that optimizes performance for
TCP/IP-based applications, including faster downloads over satellite.
To determine if TCP acceleration is operational:
1. At the System Control Center, click the
The System Status page appears.
Figure 72: Confirming that TCP Acceleration is operational
2. Check the TCP Acceleration Status field.
If the TCP Acceleration Status is Operational, TCP Acceleration is enabled and
working properly. Proceed to Confirming that Web Acceleration is operational on
page 95.
link.
System Status