Table of Contents
Advertisement
Parameter
Transmit Status
Number of Successful Transmissions
Number of Failed Transmissions
Number of Packets Submitted for
Transmission
Examining transmit status
Chapter 6 • System control center
80
1039456-0001 Revision A
The parameters listed on the Transmission Information page are explained in the
following table.
Table 8: Transmission Information page parameters
Indicates if the transmit data path is operational. Click the displayed
TxCode for explanation of the displayed code.
Number of frames transmitted to the satellite.
Number of frames that could not be sent. A continuously increasing
value indicates a transmission problem. If a low value is displayed and
does not increase, and the system is functioning, there is no reason for
concern.
Total number of data packets queued for transmission to the satellite
since the router was last restarted.
You can check the Transmit Status parameter to find out if the transmission data path
is operational or if there is a problem. Normal transmit status is indicated by the
message
Transmitter ready
The following two illustrations show how you can view a list of all TxCodes or see an
explanation of the currently displayed TxCode. Each TxCode—except TxCode 8
—indicates a specific problem in the transmission path.
Figure 62: Finding additional Transmit Status information
Explanation
(
).
TxCode 8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
