Parameter Explanation - Hughes HX90 Installation Manual

Signal Strength
Receive Status
Transmit Status
Software Download Status
Service Status
Chapter 6 • System control center
76
1039456-0001 Revision A
Available system status values may vary, depending on how the satellite router is
configured. Therefore, some options shown in Figure 57 may not appear on your
System Status screen.
Figure 57: System Status page
The parameters listed on the System Status page are explained in the following
table.
Table 6: System Status page parameters
Parameter Explanation
Receive signal strength. A value of 30 or less indicates a weak
signal.
Indicates if the receive data path is operational or other
status. Click the displayed RxCode for explanation of the
displayed code.
Indicates if the transmit data path is operational or other
status. Click the displayed TxCode for corresponding Help
information.
Indicates if the satellite router's software and
configuration are up to date.
Indicates if the router has been commissioned (registered
with the system). You can determine if the router has ever
been de-commissioned by clicking the Service History l ink.